寧波瑞柯偉業計器有限公司
トップページ>製品>粉末及び粒子休止角測定器
粉末及び粒子休止角測定器
粉末及び粒子休止角測定器
製品の詳細

FT-104B Series angle of repose meter

一.Definitionを定義するには:

休止角とは、粉体堆積層の自由斜面が静止した平衡状態において、水平面と形成される角


粉末及び粒子休止角測定器


the

angle of repose is the maximum angle formed between the free slope of the

powder accumulation under static equilibrium state and horizontal plane.

二.動作原理principle:

休止角の一般的な方法は固定円錐法(残留円錐法とも呼ばれる)である。固定円錐法は、粉体堆積層の斜辺の材料が円盤の縁に沿って自動的に流出するまで、ある有限直径の円盤中心に粉体を注入し、注入を停止し、休止角を測定する。

the

usual method of angle of repose is to fix the cone method (also called residual

conic method).Fixed cone method : inject powder to the center of disc with limited diameter, until

the hypotenuse powder accumulation of material automatically flow along the edge of disk, stop injection,

measure angle of repose.

三.特徴Characteristics:

試験粉末と粒子が漏斗を通過する時間と形成の角度、試験前に予備堆積を行い、サンプル量、既知品質粉末を漏斗から流出して形成された堆積角、及び流出に必要な時間を知る、休止角と流速データを得ることができる。

test

time and angel of powder and particle pass

through the funnel , preaccumulate before testing, so as to determine the

sample weight, the known mass powder flowed from the funnel and form the

accumulation of Angle, and the time it takes to outflow;You can obtain the

angle of repose and the flow rate data.

粉体の休止角

angle

of repose of powder

<

30º

30º~45º

45º~60º

60º~90º

流動性表示

Flow

performance

よい

better

より良い

good

より劣る

worse

差分

poor

休止角で粉体の流動性能を評価するには、流動性の良し悪しを示すか、同種粉体の水分や粒度などによる流動性の差を比較するために用いるしかない。

With

the Angle of repose evaluation flow properties of powders, can only say the stand

or fall of liquidity, or used to compare the same powder liquidity difference

caused by moisture and particle size, etc.

GB 11986-89「界面活性剤粉体と粒子休止角の測定」参照

It

was designed and manufacured According to GB11986-89 'determination of

surfactant powder and particle angle of repose '

ISO 4324-1977要件、粉体と粒子の休止角の測定、

ISO4324-1977

requirement; The determination of the Angle of repose t for powder and particle

USP(米国薬局方)、BP(英国薬局方)、EP(欧州薬局方)参照:DIN ISO 4324-December 1983

It

also Applies to USP (the United States pharmacopoeia), BP (British

pharmacopoeia) and EP (European pharmacopoeia) specification requirements of

the reference standard: DIN, ISO 4324 - December 1983.

四.適用範囲scope of application:

製薬、工業化学、洗浄、科学研究院、品質検査機構などの関連粉末粉体及び顆粒材料の検査に用いる、粉体貯蔵特性の変化をサイロに貯蔵する場合などを提供することができる。

They

are widely used in pharmaceutical, chemical industry, washing, scientific

research institutions, quality inspection institutions, and so on related

detection of powder and granular materials;Changes in the properties of the

powders can be provided, especially in the silo Storage conditions etc.

五.モデルおよび技術パラメータModel and technical parameters:

機能項目

functional item

FT-104B

FT-104B2

1.透明ディスクTransparent

Disc:

直径diameter 100 mm

2.漏斗寸法:Funnel

Dimension

:

約外径155 mm内径145 mm

outer

diameter 155mm, inner diameter 145mm.

ホッパ数

funnel

numbers

1つのテスト漏斗

1pcs

testing funnel

2個(フィードホッパとテストホッパ各1個)

2pcs

(each one feed funnel and test funnel)

かくはん装置

stirring

apparatus

あります

include

なし

Not

オンライン照会
  • 連絡する
  • 単位
  • 電話番号
  • Eメール
  • ウィーチャット
  • 認証コード
  • メッセージの内容

Successful operation!

Successful operation!

Successful operation!